Headlight assembly, remove and install, non Ellipsoid
Unlatch hood so that it sits up on its hinge, do not lift hood.
| Remove 3 clips from top edge of plastic grille.(green arrows) Remove 2
screws from lower edge, one inboard by kidney grille, the other out under the low beam
light. (blue arrows) |
 |
Pull grille straight out and off headlights
| Remove plastic cover behind headlights by twisting 1/4 turn clips. Unplug
headlights |
 |
| Remove three screws retaining assembly from front of lights, one on top
between the lights, one on the outside of each light. |
 |
| Lift out assembly. |
|
|
