Back Index Up Next

Speedometer sending unit, remove and install

Sending unit is located in the rear cover of the rear differential

Squeeze tabs on either side of the plug and disconnect it.

Remove the two 10mm bolts from the sending unit and pull unit out.

CAUTION:  Some oil loss can occur.

Installation:

Sender has flat side to ensure correct orientation.

Replace O ring

Torques :

Sending unit to cover : 10 Nm (7 ft lbs.)

 

Back Index Up Next
E30 M3 Repair Manual V2.7.  Copyright ©1999-2001 Koala Motorsport & Brett Anderson