Trunk trim panels remove and installALL : Remove floor mat Seatback panelRemove 4 expanding rivets across panel and remove panel Left side panelRemove jack Remove rear trim panel, see below Pull trim down from top, then lift out. Take car with jack holder. Right side panelRemove battery cover, if applicable Remove seatback panel, see above Remove rear panel, see below Lift panel out from the bottom Rear panelPush down pins in upper trim until they fall through. Remove clips and take off upper trim Remove tail light covers by twisting both 1/4 turn clips, or unscrewing the single knob on later cars. Pull out rear panel from bottom. |
|
|